UBS Anti-Gravel with structure

Quick-drying agent based on synthetic resins designed for the protection of car bodies. Provides long-term protection against the chemical and mechanical factors (including harmful effects of fuel, oil, water and salt) for the front and rear of the car bodies, car sills, wheel housings etc. It is characterized by very good adhesion, creates visible structure, does not contain asphalts and bitumen. Can be overcoated with any lacquer systems*.

* Compatibility test is recommended.

Usage:

• The best results are achieved by applying the product at room temperature. Room temperature and the temperature of the product should be the same.
• Shake before using for 2 minutes and try it on a cardboard.
• During lacquering hold aerosol with 25÷30 cm of distance from the surface.
• Apply 2 or 3 single layers with an interval of 5 – 10 minutes. Shake aerosol before applying each layer.
• Clean the spray nozzle after use! – Hold the can with the valve pointing downward, press the button emptying the content for about 5 seconds.

Caution: For safety reasons always follow the information provided in the Material Safety Data Sheet.

Can be covered with any varnish*.

Drying time at 20°C: 2 – 3 hours

* Compatibility test is recommended.
**Drying time depends on air temperature, humidity and thickness of the layer

Substrates

Product has very good adhesio to various substrates. It can be applied over:

• Polyester laminates
• Polyester putties
• Epoxy primers
• 2K Acrylic primers
• Steel, galvanized steel and stainless steel
• Aluminium Wash primer
• Plastic