MASTER Anticorrosive Epoxy Primer

MASTER Epoxy Primer

1K epoxy primer designed to prepare the surface for topcoating. It has very good anti-corrosion properties and provides effective insulation against moisture. The primer can be applied directly to steel, galvanized steel, stainless steel, aluminum and old paint coatings. Can be applied wet on wet, ideally suited for spot repairs. Can be overcoated with water and solvent based systems*.

* Compatibility test is recommended.

Usage:

• The best results are achieved by applying the product at room temperature. Room temperature and the temperature of the product should be the same.
• Surface must be carefully cleaned from rust, dirt, dust and old paint.
• Shake before using for 2-3 minutes and try it on a cardboard.
• Apply from a distance of approx. 25cm.
• Apply 1 or 2 layers as needed.
• Clean the spray nozzle after use! – Hold the can with the valve pointing downward, press the button emptying the content for about 5 seconds.

Caution: For safety reasons always follow the information provided in the Material Safety Data Sheet.

The primer can be applied directly to steel, galvanized steel, stainless steel, aluminum and old paint coatings. Can be applied wet on wet.

Drying time: 10 – 15 min/20°C