SATA dry jet 2 blow gun

Tags: sata, dry, jet, 2, blow, gun, dry, jet, 2, all, products

SATA dry jet 2 blow gun

(0/5):
rating
$270.00
  • Availability: In Stock
  • Brand: Sata
  • Product Code: Dry Jet 2

SATA Dry Jet 2 - More efficient and easier to use

To ensure a fast-drying process following the application of waterborne paint, it is vital to apply as much air as possible within a short period of time onto the painted object. To achieve this objective, the new SATA dry jet 2 also relies on the Venturi principle like its predecessor: In addition to the compressed air feeding the system, a multiple of ambient air is drawn in that serves directly to accelerate the drying process.

The new design of the flat fan nozzle immediately catches your attention. Thanks to its special shape, the SATA dry jet 2 has an extra large air footprint, which further increases the drying efficiency, helping reduce the flash-off time and enhance the quality of the drying process at the same time – thus increasing profitability. The recommended Inlet Pressure is 29 to 35 psi and uses extremely low CFM 8.2 to 9.35 CFM, with the Venturi principle design the CFM is magnified x10 to give a 92.35 CFM output. Due to the integrated air regulation, the painter can precisely adjust the air supply to adapt the airflow volume to ideally suit the requirements of the painted object. A painter can dry entire side of a car with one SATA dry jet 2.


Features of the SATA dry jet blow guns:

  • Reduced flash-off time of waterborne paint
  • Low investment cost
  • Practical product versions
  • Integrated air regulation
  • Ergonomic handle
  • Easy handling
  • Long lifetime and low maintenance

SATA Dry Jet 2 - More efficient and easier to use

To ensure a fast-drying process following the application of waterborne paint, it is vital to apply as much air as possible within a short period of time onto the painted object. To achieve this objective, the new SATA dry jet 2 also relies on the Venturi principle like its predecessor: In addition to the compressed air feeding the system, a multiple of ambient air is drawn in that serves directly to accelerate the drying process.

The new design of the flat fan nozzle immediately catches your attention. Thanks to its special shape, the SATA dry jet 2 has an extra large air footprint, which further increases the drying efficiency, helping reduce the flash-off time and enhance the quality of the drying process at the same time – thus increasing profitability. The recommended Inlet Pressure is 29 to 35 psi and uses extremely low CFM 8.2 to 9.35 CFM, with the Venturi principle design the CFM is magnified x10 to give a 92.35 CFM output. Due to the integrated air regulation, the painter can precisely adjust the air supply to adapt the airflow volume to ideally suit the requirements of the painted object. A painter can dry entire side of a car with one SATA dry jet 2.


Features of the SATA dry jet blow guns:

  • Reduced flash-off time of waterborne paint
  • Low investment cost
  • Practical product versions
  • Integrated air regulation
  • Ergonomic handle
  • Easy handling
  • Long lifetime and low maintenance

Write a review

Note: HTML is not translated!
    Bad           Good
Captcha
ARPSHOP