SATA Filter 500 Series

SATA filter 500 series
SATA Filter 584/ 544/ 564/ 584

Clean compressed air for perfect finishes.
The SATA filter series 500 is available as a one-stage sintered filter with a water and oil separator, a two-stage combination filter with sintered and fine filters, or a three-stage filter unit with an additional activated charcoal filter.

The flow-optimized cyclone separator (defined position) ensures a constant and uniform airflow and uninterrupted air rotation over a longer distance. It also minimizes the system's pressure drop, resulting in a notably enhanced particle separation.

Product Benefits

Higher absorption of contaminations (compared to SATA filter 484) due to the new sintered activated charcoal filter. Synchronized maintenance: Filter maintenance is only necessary every six months for all stages
Maintenance-free bayonet lock with haptic and acoustic feedback
Fine filter and activated charcoal filter cartridges fit perfectly by being inserted – no screw fittings or additional seals
Simple plug-in system for upgrading SATA filter 544 to 584
Maintenance-free sealing elements
Line connection is possible either from the left or the right side
Airflow at 6 bar: 3,800 Nl/min

Technical data:

Airflow inlet: G1/2" female treat

Air outlet: 1/4" male treat

Max inlet operating pressure: 217 psi

Max outlet operating pressure: 217 psi

Air flow at 90 psi: approx. 135 cfm

Max. ambient temperature: 120 °C

Max. ambient temperature

with activated charcoal: 60 °C