MASTER Epoxy Primer

Currently viewing this product: 17 visitor(s)

MASTER Epoxy Primer

  • Availability: Out Of Stock

MASTER Epoxy Primer

One-component primer, designed to prepare the surface for the topcoat.

  • Contains anti-corrosion components. 
  • Provides effective insulation against moisture. 
  • Can be applied directly to steel, galvanized steel, stainless steel, aluminum and old topcoats. 
  • Can be used in the "wet on wet" system. 
  • Ideal for site repairs
  • Can be repainted with water and diluent systems*.

* It is recommended to perform a compatibility test.


  • The best results will be achieved by applying it at room temperature.
  • The ambient temperature and the temperature of the applied product should be similar.
  • The substrate must be dry, cleaned of dirt, grease and rust and gently ground.
  • Shake the container for about 2 – 3 minutes before use and try the spray on the cardboard box.
  • Apply from a distance of approx. 25 cm.
  • Apply one or two layers as needed.
  • Curing time: 10 – 15 min/20°C

After the application, set the aerosol with the valve down and press the button to release the contents for about 5 seconds to preserve the product for reuse and protect the nozzle from clogging.

Article #              Colour                       Capacity

  9244              Light Grey                     500 ml

  9245              Dark Grey                     500 ml

Technical Data Sheet Safety Data Sheet

Available Options

Tags: master, epoxy, primer, aerosols, aerosol, spray, sprayable

Write a review

Please login or register to review