MASTER Clear Coat

Currently viewing this product: 2 visitor(s)

MASTER Clear Coat

  • Availability: 14

MASTER Clear Coat

Quick-drying acrylic clear coat with good adhesion to wood, metal, aluminum, glass, stone and various types of plastics. 


  • The best results will be achieved by applying a clear coat at room temperature. The ambient temperature and the temperature of the product should be similar.
  • The substrate must be dry, cleaned of dirt and grease, and gently ground with sandpaper (P600).
  • It is necessary to cover the places that are to remain unpainted.
  • Shake the container for about 2 – 3 minutes before use, and try the spray on the cardboard box.
  • Apply from approximately 25 cm.
  • Apply one or two layers as needed.

After the application, set the aerosol with the valve down and press the button to release the contents for about 5 seconds to preserve the product for reuse and protect the nozzle from clogging

Drying times (at 20°C) *:

  • dustiness: after about 5 – 10 minutes
  • tactile dryness: after about 10 – 20 minutes
  • total dryness: after about 2 hours

*Drying time depends on air temperature, humidity and thickness of the applied layers.

    Article #           Capacity 

     3661                 500 ml

Technical Data Sheet Safety Data Sheet

Tags: master, clear, coat, aerosols, aerosol

Write a review

Please login or register to review