13/03/2019 | ARPSHOP
When working should be aware of the following aspects:
The cleanliness of the water tank is paramount. The fact is that only a few grains of sand, incidentally on a circle or surface, can irrevocably spoil the result of work by scratching the paintwork...
13/03/2019 | ARPSHOP
1. Stages of polishing
Basically, the polishing is divided into two stages:
- the first is restorative polishing;
- the second is protective polishing.
Restorative polishing is usually done using abrasive pastes. Such a polishing removes the thinnest, very topmost layer of clearcoat, "beaten" by life, full of scratches, scuffs and chips - it already only spoils the appearance of the car, and therefore must be removed.
01/02/2019 | ARPSHOP
ANEST IWATA Corporation was founded in 1926 and is currently one of the largest manufacturers of paint and clearcoat equipment in the world.
ANEST IWATA engineers have created a unique spraying technology due to the design feature of the "cut nozzle", which allows for better surface coverage.
17/01/2019 | ARPSHOP
By the principle of operation this tool is:
- RANDOM ORBITAL (with eccentric).
The first type is structurally very similar to the grinder and has lower rotational speed and high torque. It is for this reason that the latter is unsuitable for polishing the car body.
31/12/2018 | ARPSHOP
When choosing a body work tools, you need to proceed from the criteria of quality, not price. Not always the cost objectively reflects the quality of the product. For this, it is better to consult professional craftsmen who know a lot about it.
18/12/2018 | ARPSHOP
When choosing bodywork tools, you need to proceed from the criteria of quality, not price. Not always the cost objectively reflects the quality of the product. For this, it is better to consult professional craftsmen who know a lot about it.
On the pages of our site you will find a description of the necessary tool with its technical characteristics. Our experts will be happy to answer all your questions.
01/10/2017 | ARPSHOP
The construction of spray guns includes:
-housing with channels for the supply of compressed air and paint, equipped with needle valves,
trigger lever, control valve switching,
-outlet nozzle for the formation and formation of the desired shape of the flame,
-reservoir (tank) for paint,
-adjusting screws for changing airflow, paint and spray spot corrections.