Auto Body Shop Tools in Toronto - Blog

With what and how to clean, wash, rinse with a spray gun from water based paint?

Any tool must be handled with care, with love, with proper care for it. The spray gun after work must be immediately rinsed well from paint. If you forgot and the paint dried up, polymerized, then you can say goodbye to it. But you can try to clean it, you can rinse it. Each paint has its own solvent, and it is necessary to rinse the spray gun in it.

To do this, if possible, disassemble the spray gun and first soak all the parts in a solvent, and then rinse. The main thing is to clean the nozzle, nozzle, needle. Soft brushes, special brushes, sets of needles are sold for cleaning spray guns and spray guns.

When all the parts have been washed, they must be rinsed again in a clean solvent, blown with compressed air and then the spray gun is assembled in the reverse order. And check how it works, but instead of paint, pour solvent into the barrel.


Read more

Random Orbital Sander - MIRKA 5" DEROS 550CV 125mm/ Orbit 5.0mm Electric Vacuum-Ready

Mirka 5" DEROS Electric Sander 550CV 5mm Orbit (MID55020CAUS) is the first ever electric sanding machine with a brushless motor and no external power supply and is the lightest electric machine on the market. The 5mm (3/16") random orbit is perfectly suited for most sanding tasks.

Read more

Air Pressure and Volume

We offer an informative video that explains how air pressure and volume impact to your paint performance and how it goes through your spray guns.

Read more

SATA filter 584 – Maintenance

SATA filter 584 – Maintenance

Read more

HOW TO INSTALL SATA ADAM 2

SATA offers Adam 2 series for filters 500 series. This video helps you to install this product. 

Read more

MIRKA IRIDIUM.

The new Mirka Iridium sandpaper is the result of several years of development work. Iridium is manufactured with innovative technology, optimized for speed and efficiency. Iridium allows for a faster sanding process, with fewer steps from a rough to a fine surface.

Read more

How to maintain SATA AIR VISION 5000

Here’s how to maintain your Sata mask and replace its various components. This will help you make sure your mask is always clean and ready for use.

Read more

HOW TO CLEAN YOUR SATA SPRAY GUN

At ARPSHOP, we are always ready to help with advice and guidance, and we always have the most common spare parts in stock. In addition, we take pride in knowing all the details for the equipment, so our customers can have a good experience with their project from start to finish.

Read more

High quality refinishing products Master Troton

The line was created from the combination of 40 years of experience, modern technology and excellent raw materials. Products from this line help to shorten and facilitate the technological process in the workshop.

Read more

MIRKA TWO-HANDED ROTARY POLISHER/SANDER

This MIRKA® MR-30TH (non vacuum) Two-handed Rotary Polisher is a powerful tool providing a fast way to a perfect finish.

Read more
Showing 1 to 10 of 69 (7 Pages)
ARPSHOP