T2 ANTIHOLOGRAM & MICROSCRATCH REMOVER

Tags: Compound, pasta, finishing, polishing, glossy, scratch, antihologram, remover

T2 ANTIHOLOGRAM & MICROSCRATCH REMOVER

Buyer Rates (0/5):
rating
$42.00
  • Availability: In Stock
  • Product Line BRAYT
  • Product Category: Car care & Ditailing

Size: 1 kg                 

T2 Antihologram & Microscratch Remover a new generation formula designed to remove holograms and microscratches on painted surface.
product is suitable to eliminate traces after polishing, guarantees perfect gloss and creates a protective layer resistant to detergents. Thanks to its efficiency, T2 antihologram & microscratch remover significantly reduces the cost of polishing.


  • USAGE:

       ·       In case of polishing on big surface work a small area at time.

·       Apply compound on polishing pad. It’s recommended to use a small amount because its excess will increase working time.

·       First use polisher in low speed range to accurately distribute product in the surface. Work in speed range between 600 – 800 RPM, depending on polisher

·       Gradually increase speed to maximum 2000 RPM.

·       Polish until all imperfection are removed and gradually reduce speed.

·       After polishing remove any residue using clean microfiber cloth.

 


Size: 1 kg                 

T2 Antihologram & Microscratch Remover a new generation formula designed to remove holograms and microscratches on painted surface.
product is suitable to eliminate traces after polishing, guarantees perfect gloss and creates a protective layer resistant to detergents. Thanks to its efficiency, T2 antihologram & microscratch remover significantly reduces the cost of polishing.


  • USAGE:

       ·       In case of polishing on big surface work a small area at time.

·       Apply compound on polishing pad. It’s recommended to use a small amount because its excess will increase working time.

·       First use polisher in low speed range to accurately distribute product in the surface. Work in speed range between 600 – 800 RPM, depending on polisher

·       Gradually increase speed to maximum 2000 RPM.

·       Polish until all imperfection are removed and gradually reduce speed.

·       After polishing remove any residue using clean microfiber cloth.

 


Write a review

Note: HTML is not translated!
    Bad           Good
Captcha