Spraygun SATAjet X 5500 RP
14/05/2020 | ARPSHOP
SATAjet X 5500 spray gun
Two ways to achieve the perfect paint finish: HVLP and RP
Ultrafast SATAjet X 5500 RP spraygun for maximum speed with optimized high-pressure technology and low overspray.
Both models can be used very universally, meet the highest requirements for the result of painting and significantly exceed the transmission efficiency set by the VOC directive at 65%.
Complex paint and varnish systems and new recommendations for working with them not only provide new opportunities, but also pose new challenges for the user.
The SATAjet X 5500 airbrush with the new “X” nozzle system sets a new standard for the future.
The nozzle system has a simple and intuitive design: both proven technologies - namely HVLP and RP - are retained. Each has its own set of nozzles "I" and "O". As the nozzle size in a particular technology (HVLP / RP) and the shape of the sprayed jet (“I” or “O”) increase, the ejection of material constantly increases - this means that the height and width of the jet remain unchanged throughout the spectrum. Thus, the user has a transparent and logical system that allows him to make clear and structured decisions.
2 types of nozzles I and O“I” nozzles have an elongated jet shape with a short exit zone and a drier torch core, which is ideal for low application speed and provides maximum control during the painting process. The layer thickness at each application with the same nozzle size compared to the “O” nozzle is slightly less.
“O” nozzles have an oval shape of a jet with a larger exit zone, as well as a wet torch core, which is suitable for a higher application speed, but provides less control during the painting process. The layer thickness at each application with the same nozzle size compared to the "I" nozzle is slightly larger.
SATAjet X 5500 - perfection down to the smallest detail
You can buy Spraygun SATAjet X 5500 RP now with 17% discount!
Watch the SATAjet X 5500 RP video presentation